NVIDIA G-Sync Review
by Anand Lal Shimpi on December 12, 2013 9:00 AM ESTIt started at CES, nearly 12 months ago. NVIDIA announced GeForce Experience, a software solution to the problem of choosing optimal graphics settings for your PC in the games you play. With console games, the developer has already selected what it believes is the right balance of visual quality and frame rate. On the PC, these decisions are left up to the end user. We’ve seen some games try and solve the problem by limiting the number of available graphical options, but other than that it’s a problem that didn’t see much widespread attention. After all, PC gamers are used to fiddling around with settings - it’s just an expected part of the experience. In an attempt to broaden the PC gaming user base (likely somewhat motivated by a lack of next-gen console wins), NVIDIA came up with GeForce Experience. NVIDIA already tests a huge number of games across a broad range of NVIDIA hardware, so it has a good idea of what the best settings may be for each game/PC combination.
Also at CES 2013 NVIDIA announced Project Shield, later renamed to just Shield. The somewhat odd but surprisingly decent portable Android gaming system served another function: it could be used to play PC games on your TV, streaming directly from your PC.
Finally, NVIDIA has been quietly (and lately not-so-quietly) engaged with Valve in its SteamOS and Steam Machine efforts (admittedly, so is AMD).
From where I stand, it sure does look like NVIDIA is trying to bring aspects of console gaming to PCs. You could go one step further and say that NVIDIA appears to be highly motivated to improve gaming in more ways than pushing for higher quality graphics and higher frame rates.
All of this makes sense after all. With ATI and AMD fully integrated, and Intel finally taking graphics (somewhat) seriously, NVIDIA needs to do a lot more to remain relevant (and dominant) in the industry going forward. Simply putting out good GPUs will only take the company so far.
NVIDIA’s latest attempt is G-Sync, a hardware solution for displays that enables a semi-variable refresh rate driven by a supported NVIDIA graphics card. The premise is pretty simple to understand. Displays and GPUs update content asynchronously by nature. A display panel updates itself at a fixed interval (its refresh rate), usually 60 times per second (60Hz) for the majority of panels. Gaming specific displays might support even higher refresh rates of 120Hz or 144Hz. GPUs on the other hand render frames as quickly as possible, presenting them to the display whenever they’re done.
When you have a frame that arrives in the middle of a refresh, the display ends up drawing parts of multiple frames on the screen at the same time. Drawing parts of multiple frames at the same time can result in visual artifacts, or tears, separating the individual frames. You’ll notice tearing as horizontal lines/artifacts that seem to scroll across the screen. It can be incredibly distracting.
You can avoid tearing by keeping the GPU and display in sync. Enabling vsync does just this. The GPU will only ship frames off to the display in sync with the panel’s refresh rate. Tearing goes away, but you get a new artifact: stuttering.
Because the content of each frame of a game can vary wildly, the GPU’s frame rate can be similarly variable. Once again we find ourselves in a situation where the GPU wants to present a frame out of sync with the display. With vsync enabled, the GPU will wait to deliver the frame until the next refresh period, resulting in a repeated frame in the interim. This repeated frame manifests itself as stuttering. As long as you have a frame rate that isn’t perfectly aligned with your refresh rate, you’ve got the potential for visible stuttering.
G-Sync purports to offer the best of both worlds. Simply put, G-Sync attempts to make the display wait to refresh itself until the GPU is ready with a new frame. No tearing, no stuttering - just buttery smoothness. And of course, only available on NVIDIA GPUs with a G-Sync display. As always, the devil is in the details.
How it Works
G-Sync is a hardware solution, and in this case the hardware resides inside a G-Sync enabled display. NVIDIA swaps out the display’s scaler for a G-Sync board, leaving the panel and timing controller (TCON) untouched. Despite its physical location in the display chain, the current G-Sync board doesn’t actually feature a hardware scaler. For its intended purpose, the lack of any scaling hardware isn’t a big deal since you’ll have a more than capable GPU driving the panel and handling all scaling duties.
G-Sync works by manipulating the display’s VBLANK (vertical blanking interval). VBLANK is the period of time between the display rasterizing the last line of the current frame and drawing the first line of the next frame. It’s called an interval because during this period of time no screen updates happen, the display remains static displaying the current frame before drawing the next one. VBLANK is a remnant of the CRT days where it was necessary to give the CRTs time to begin scanning at the top of the display once again. The interval remains today in LCD flat panels, although it’s technically unnecessary. The G-Sync module inside the display modifies VBLANK to cause the display to hold the present frame until the GPU is ready to deliver a new one.
With a G-Sync enabled display, when the monitor is done drawing the current frame it waits until the GPU has another one ready for display before starting the next draw process. The delay is controlled purely by playing with the VBLANK interval.
You can only do so much with VBLANK manipulation though. In present implementations the longest NVIDIA can hold a single frame is 33.3ms (30Hz). If the next frame isn’t ready by then, the G-Sync module will tell the display to redraw the last frame. The upper bound is limited by the panel/TCON at this point, with the only G-Sync monitor available today going as high as 6.94ms (144Hz). NVIDIA made it a point to mention that the 144Hz limitation isn’t a G-Sync limit, but a panel limit.
The G-Sync board itself features an FPGA and 768MB of DDR3 memory. NVIDIA claims the on-board DRAM isn’t much greater than what you’d typically find on a scaler inside a display. The added DRAM is partially necessary to allow for more bandwidth to memory (additional physical DRAM devices). NVIDIA uses the memory for a number of things, one of which is to store the previous frame so that it can be compared to the incoming frame for overdrive calculations.
The first G-Sync module only supports output over DisplayPort 1.2, though there is nothing technically stopping NVIDIA from adding support for HDMI/DVI in future versions. Similarly, the current G-Sync board doesn’t support audio but NVIDIA claims it could be added in future versions (NVIDIA’s thinking here is that most gamers will want something other than speakers integrated into their displays). The final limitation of the first G-Sync implementation is that it can only connect to displays over LVDS. NVIDIA plans on enabling V-by-One support in the next version of the G-Sync module, although there’s nothing stopping it from enabling eDP support as well.
Enabling G-Sync does have a small but measurable performance impact on frame rate. After the GPU renders a frame with G-Sync enabled, it will start polling the display to see if it’s in a VBLANK period or not to ensure that the GPU won’t scan in the middle of a scan out. The polling takes about 1ms, which translates to a 3 - 5% performance impact compared to v-sync on. NVIDIA is working on eliminating the polling entirely, but for now that’s how it’s done.
NVIDIA retrofitted an ASUS VG248QE display with its first generation G-Sync board to demo the technology. The V248QE is a 144Hz 24” 1080p TN display, a good fit for gamers but not exactly the best looking display in the world. Given its current price point ($250 - $280) and focus on a very high refresh rate, there are bound to be tradeoffs (the lack of an IPS panel being the big one here). Despite NVIDIA’s first choice being a TN display, G-Sync will work just fine with an IPS panel and I’m expecting to see new G-Sync displays announced in the not too distant future. There’s also nothing stopping a display manufacturer from building a 4K G-Sync display. DisplayPort 1.2 is fully supported, so 4K/60Hz is the max you’ll see at this point. That being said, I think it’s far more likely that we’ll see a 2560 x 1440 IPS display with G-Sync rather than a 4K model in the near term.
Naturally I disassembled the VG248QE to get a look at the extent of the modifications to get G-Sync working on the display. Thankfully taking apart the display is rather simple. After unscrewing the VESA mount, I just had to pry the bezel away from the back of the display. With the monitor on its back, I used a flathead screw driver to begin separating the plastic using the two cutouts at the bottom edge of the display. I then went along the edge of the panel, separating the bezel from the back of the monitor until I unhooked all of the latches. It was really pretty easy to take apart.
Once inside, it’s just a matter of removing some cables and unscrewing a few screws. I’m not sure what the VG248QE looks like normally, but inside the G-Sync modified version the metal cage that’s home to the main PCB is simply taped to the back of the display panel. You can also see that NVIDIA left the speakers intact, there’s just no place for them to connect to.
It looks like NVIDIA may have built a custom PCB for the VG248QE and then mounted the G-Sync module to it.
The G-Sync module itself looks similar to what NVIDIA included in its press materials. The 3 x 2Gb DDR3 devices are clearly visible, while the FPGA is hidden behind a heatsink. Removing the heatsink reveals what appears to be an Altera Arria V GX FPGA.
The FPGA includes an integrated LVDS interface, which makes it perfect for its role here.
193 Comments
View All Comments
repoman27 - Friday, December 13, 2013 - link
The G-Sync module is a daughter card for another custom NVIDIA board which replaces the inputs and scaler (if present) on whatever monitor they decide to build one for. Theoretically, any panel with a suitable LVDS connection for the TCON (i.e. most of them) can be supported. Also, NVIDIA only has to provide the specs for the daughter card socket and/or a reference design for their scaler replacement board in order for any display manufacturer to implement it and create a "G-Sync ready" product.MarkHunt - Friday, December 13, 2013 - link
What an exaggerated screen shot demonstrating 'tearing' - never seen anything remotely like that whilst playing a video game.ArmedandDangerous - Sunday, December 15, 2013 - link
I don't see it exaggerated. I see this very often if I turn V-Sync off. 2x7950's at 1080p running anything with V-Sync off introduces tearing.poohbear - Friday, December 13, 2013 - link
If they make a 1440p IPS display then count me in, otherwise i just don't see this as an option.web-cyborg - Friday, December 13, 2013 - link
I'll leave it at this for now because I've been posting too much..To review,
- every time you move your FoV greater than a snails pace on a sub 100hz, non backlight strobing monitor you drop to such a low rez that it isn't even definably a solid grid to your eyes and brain. So continual bursts/path-flow of the worst resolution possible more or less, the entire viewport dropping all high detail geometry and textures (including depth via bump mapping) into a blur. So much for high rez.
- 1080p is the same exact scene at 16:9 no matter what in HOR+, HOR+/virtual cinematography is used in essentially every 1st/3rd person perspective game and every virtual camera render. All of the on screen objects and the perspective are the same size on a 27" 1080p and a 27" 1440p for example (in a 1st/3rd person game). The difference is the amount of pixels in the scene providing greater detail obviously. This is a big difference but a much bigger difference for desktop/app real-estate where the usable area and display object sizes change, especially considering gpu budgets limits/fps in regard to games..
.
-at low hz and low fps, you are at greatly reduced motion definition and control definition.
Greatly less the amount of new action/animation/world state slices shown, seeing longer "freeze frame" periods during which a high hz+high fps person is seeing up to several newer updates.
1/2 the motion+control definition and opportunities to initiate actions in response at 60hz-60fps
1/3 the motion+control definition and opportunities to initiate actions in response at 40.
1/4 the motion+control definition and opportunities to initiate actions in response at 30.
-you need at least 100hz to support backlight strobing for essentially zero blur (120hz better).
-you can upscale 1080p x4 fairly cleanly on higher rez 3840x2160 (aka "quad HD") monitors if you have to, its not optimal but it can work
(so you can game at higher fps/lower rez on demanding games yet still use a high rez monitor for desktop/apps for example)
-the eizo FG2421 is a high hz 1080p VA panel that uses backlight strobing, it isn't TN.
- we know that nvidia is still supposed to support backlight strobing function as part of g-sync monitors, just that it won't work with the dynamic hz function (at least not for now). So "the industry" is still addressing backlight strobing for zero blur in both the eizo and the g-sync strobe option (which again, requires higher hz to make the strobing viable).
-We know there are higher rez and likely ips g-sync monitors due out, but we do not know if they will have the max hz bumped up which is necessary to utilize the backlight strobe function adequately.
There is more to a game than a screen shot resolution/definition.
There is continual FoV movement blur (an undefinable"non"definition resolution, unless perhaps you were to equate it to an extremely bad visual acuity number /"out of focus")
There is otherwise essentially zero blur using high hz and backlight strobing,
and there is high or low action updates and motion definition, animation definition, and control definition.
mdrejhon - Friday, December 13, 2013 - link
"-you need at least 100hz to support backlight strobing for essentially zero blur (120hz better)."Great reply, just minor clarification.
Not necessarily, if you can strobe at rates below 100Hz.
Some strobe backlights (e.g. BENQ Z-Series, such as XL2720Z) can strobe lower, like 75Hz or 85Hz.
You only need one strobe per refresh, since framerate=refreshrate on strobed displays leads to zero motion blur. (Also why CRT 60fps@60Hz has less motion blur than non-strobed LCD 120fps@120Hz). 100Hz is simply because of less flicker, and because of LightBoost's rate limitation. But nothing prevents zero motion blur at 85Hz, if you have an 85Hz strobe backlight (with low-persistence; aka brief backlight flash times).
Mark Rejhon
Chief Blur Buster
web-cyborg - Saturday, December 14, 2013 - link
yes I didn't mean that it was impossible, I meant that for people like me with "Fast eyesight" / visual acuity, 100hz sounds like it would be a good minimum against seeing flicker. I know from your posts on other forums that there are even 60hz sony tv's with some from of stobing but that would drive me crazy personally. Thanks for the input though so everyone reading knows the rest.Deepo - Friday, December 13, 2013 - link
27" VA panel and I'm in. Need this!beginner99 - Friday, December 13, 2013 - link
This $120 can also be invested into a better GPU which can easily hit 60 FPS. $120 is just way too pricy for this. I never play FPS with vsync. Especially in BC2 the effect is terrible and I can't hit anyone. The difference is day and night. However I never notice tearing...ArmedandDangerous - Sunday, December 15, 2013 - link
You need a GPU that can do a minimum 60FPS, not "average" 60FPS cos any time your FPS drops below 60, you WILL experience stutter.