The Kinesis Freestyle Edge RGB Gaming Mechanical Keyboard

One quick and rather inaccurate way to describe the Kinesis Freestyle Edge RGB would be that it is “a tenkeyless mechanical keyboard that is split in two”. Much like its predecessor, it is an atypical keyboard that cannot be really compared to typical ANSI or ISO layouts.

Further underscoring this, Kinesis even changed the layout of the keyboard in comparison to its predecessor. One of the most prominent changes is the transfer of the ESC key right above the tilde key, where it should be, forcing the designer to combine the Del and Scroll Lock keys into one key. Scroll Lock is a key that is rarely used, so the majority of the users should not care about having to access it via a two keys keystroke. Meanwhile, there are still no Windows and Menu buttons to the right side of the keyboard.

The original version of the Freestyle Edge featured an array of ten extra keys, eight programmable keys for macros/advanced commands and two for function/lighting control. The new version retains all of these keys, plus a large double-sized “game” key above them. This large key used to be the ESC key, which is now moved to the right.

Kinesis implemented a selectable dual-mode for the Fn key. By default, the Fn key operates as on most other keyboards, requiring the user to keep it pressed for the secondary commands of the other keys to function. However, it is also possible to switch the Fn key into a “lock mode”, meaning that pressing the Fn key just once will lock the keyboard into the Fn layer until the Fn key is pressed again.  It is possible, via the software, for the user to reprogram any of the keys of each layer individually, including the macro keys, meaning that the keyboard can virtually change to an entirely different layout between the Fn and the top layer with the press of a single button and without switching profiles.

 

Aside from its unique layout, there are no extra mechanical keys on the right side of the keyboard. However, there are four small surface buttons at the top of the right board. The rightmost button is the “Smartset” button and is used to access most of the keyboard’s advanced features. This includes the special commands printed on the F7-F12 keys, which do not belong to the Fn layer by default but can only be actuated by holding down the Smartset button and then pressing that key. The combination of the Smartset button, Shift key, and the F12 triggers a full reset, bringing the keyboard back to its factory default mode. One needs to be careful with that because everything is stored inside the keyboard so, unless profiles were manually extracted and stored beforehand, hours of programming different layers and long macros can be extinguished in an instant.

The left of the four small buttons is the Profile button (renamed from “layout”, most likely because gamers are familiar with the term “profile”). It allows for users to switch between the first three profiles of the keyboard. The Freestyle Edge supports up to nine profiles though, and the rest are accessible by holding down the Smartset button and pressing a number from one to nine, in which case the keyboard will jump directly to the selected layout. The second button, the Macro button, allows for the quick recording of a macro and assignment to any key. It does not require any software to function and works in all layouts and layers, and on any key. The final button, the Remap button, is very similar to the Macro button, but just remaps a button to any other instead of programming a more complex command.

We should also spend a moment to discuss the keyboard’s wrist rests. Kinesis used to have simple foam cushions in the Freestyle Edge, which were comfortable, but they could get really dirty and would need replacement sooner or later. The company went with a major upgrade here, installing leather-like (probably microfiber) cushions on the Freestyle Edge RGB. Moreover, the cushions are now removable, making it extremely easy to clean them.

Each of the keyboard’s halves has five thick rubber feet attached, plus another two smaller feet can be found on each of the palm rests. The grip on a wooden surface is just right – enough to keep the keyboard from moving unintentionally, yet not high enough to be annoying when the user intentionally wants to move one half of the keyboard. A very simple and quick programming guide is attached beneath the left half of the keyboard.

The left half of the keyboard has a hidden compartment that can be used to extend or reduce the length of the cable connecting the two halves of the keyboard.  A simple but cleverly implemented design allows for the cable’s length to be adjusted in steps of 1.5”. Note that, without the optional Lift Kit, the Freestyle Edge does not support any kind of tilt adjustments. Kinesis intentionally does not place any rear tilt feet on their keyboards. Although the vast majority of people are used to them, having a keyboard slope up from the front to back is actually hurtful for your wrists, and that is something that a company focused on ergonomics cannot have.

As expected, the Freestyle Edge RGB is using original Cherry MX switches. Our sample came with Brown switches of the RGB variant with clear bodies. The Cherry MX Brown switch is tactile but with minimal audible feedback, and Kinesis also offers the keyboard with Red and Blue switches as well. Cherry cross-type supports can be found under the larger keys. A bright white metal plate beneath the keycaps reflects and enhances the backlighting colors.

The keycaps of the Kinesis Freestyle Edge RGB are a tricky subject. Technically, all keycaps designed for Cherry MX switch stems are compatible but the layout of the keyboard is not exactly standard. Most of the main keys are standard but the right CTRL and Shift keys are 1.75x (same size as a Caps Lock key). The Spacebar keys are 3.5x wide and it is unlikely that replacements for these can be found at this point of time.

Much like its name suggests, the Freestyle Edge RGB features full 16.7 million color RGB backlighting – at least theoretically, as no human being can differentiate that many colors. Cherry MX RGB switches still have the LEDs at their top side but their translucent bodies diffuse the light around the keycap. The lighting still is brighter at the top of the key, where the main character is, making the secondary characters at the bottom of the keycap barely readable. That is an inherent limitation of the Cherry MX RGB switch design and is not something that can be easily fixed while using these particular switches. 

The optional Lift Kit allows each half of the keyboard to “tent”. It is a tilt mechanism but, instead of tilting the keyboard from the rear up, it lifts each half sideways, towards the hands of the user. It has three tilt angles, from five to fifteen degrees in five degrees steps. We should also note that the palm rests are a requirement for the lift kit to be attached. As the lift kit virtually locks on the wrist rest itself, it cannot be used without the palm rests.

Removing the plastic covers of the keyboard reveals two thick steel frames that support the main PCBs and the keyboard’s switches. Everything is very well secured and cleanly routed, without any design or assembly job imperfections that we could spot. A glance on the stamped date reveals that Kinesis had these in the works for quite a while now.

It is also worthwhile to mention that the four short buttons have caps directly attached onto them, much like the keycaps of the standard keys. They are not free-floating or supported by the plastic frame. This approach makes them feel much better to the touch, as the buttons do not wobble at all and they have a respectable key travel, mimicking that of the main mechanical keys.

 

The heart of the Kinesis Freestyle Edge RGB remains the same as its predecessor. It is the Atmel AT32UC3B0256 microcontroller with a 32-bit, 60 MHz RISC processor. Kinesis probably selected it for its large 256KB integrated flash memory. It is not a very popular microprocessor, but it is more than adequately powerful for an advanced mechanical keyboard. There is also a 4MB onboard memory that stores all of the keyboard’s data, including profiles and macros.

Introduction, Packaging & Bundle Software
POST A COMMENT

51 Comments

View All Comments

  • Voo - Monday, July 22, 2019 - link

    Ah yes, I think that's the natural progression: normal keyboard => ergonomic MS one => getting tired of replacing them once a year or more often => need good mechanical ergonomic keyboard. Reply
  • bldr - Thursday, July 18, 2019 - link

    That's a rare feeling! The response is appreciated :) thank you Ryan Reply
  • mode_13h - Wednesday, July 17, 2019 - link

    Talking about Kinesis keyboards as an ergonomic masterpiece should only be done in reference to their Advantage series.

    https://kinesis-ergo.com/shop/advantage2/

    Not recommended for gaming, due to the weird layout, but there's no better comfort or efficiency for serious typing.
    Reply
  • parmand - Wednesday, July 17, 2019 - link

    Man, I love my advantage for gaming. Sure, I have to rebind all my keys, but it works great. Reply
  • Ktracho - Monday, July 22, 2019 - link

    I'm on my third Advantage - one at work, one at home, one to use while on vacation. The one I use at work was my first one, and it is over 20 years old. It took me maybe an hour or two to get used to it. The only down side, which I think is shared with the Freestyle, is that it's hard to use one-handed, such as when you have a coffee cup in the other hand. I use the Dvorak layout, which took me a half day to be comfortable with, and this makes one-handed typing even harder. I suppose the one-handed Dvorak layout would fix this, but it's easier to just put down the coffee cup. :-) Reply
  • kmo12345 - Wednesday, July 17, 2019 - link

    Damn... I just upgraded from a Freestyle2 (non mechanical and no backlights) two months ago... Reply
  • BenSkywalker - Wednesday, July 17, 2019 - link

    So close to perfect, but deal breaking no number pad, meh.... Reply
  • twtech - Thursday, July 18, 2019 - link

    I typically never use the number pad, so I actually appreciate that it doesn't have one. But keeping in the spirit of a split keyboard, you can buy a separate mechanical number pad.

    https://kinesis-ergo.com/shop/mechanical-keypad-fo...

    Yeah, overall it's a big investment to get everything you need - and I don't know that it's worth it if all you're actually going to do with it is gaming - but if you have an IT/programming job for example, I think you could do a lot worse in terms of dollars spent vs. the hours of use you'll get out of it.
    Reply
  • The_Assimilator - Monday, July 22, 2019 - link

    No. Numpad must die. It is nothing more than a waste of space. Reply
  • jjthejetphan - Wednesday, July 17, 2019 - link

    It appears that the author did not attempt to use this keyboard on macOS.

    I bought the Freestyle Edge and nearly had to return it due to the non-standard spacebar and modifier key layout, specifically on the left hand. If you try to use the "alt" or "win" keys as your "cmd" key on macOS, you fill quickly find your thumb and and wrist in a decent amount of pain due to the contorsion necessary to press these keys with your thumb.

    Are there people out there that do not use their thumb to press the left hand modifier keys?

    Anyway, I was able to resolve the issue by remapping the left spacebar to "cmd". It turns out that I am exclusively a right handed space bar user, so no adjustment was necessary. I wager that most Windows users do not run into this issue because they use their pinky to access the more common "crtl" based shortcuts on Windows.
    Reply

Log in

Don't have an account? Sign up now