The low powered AMD Fusion market is still an active one, and although the ASUS E35M1-M Pro has been available for a while, we have been asked to have a look.  By definition, it is a low powered board with a 1.6 GHz dual core and a 500 MHz GPU clock with 80 stream processors.  We clocked a basic system at around 32 W idle, with the APU cooled passively.


Whilst CPU or GPU intensive tasks are out of the question with a Fusion based system, Fusion boards do have their own advantages such as ultra low power consumption devices, which allow the APU to be passively cooled for a truly silent PC. The optional supplied micro-fan does not add much noise into the equation for low usage, but each end user may or may not want the noise in the background.

There are plenty of connectivity options available on the E35M1-M Pro. In total, there are six SATA 6 Gbps ports and twelve USB 2.0 ports available on this motherboard which should satisfy most requirements. Full HD playback is made possible by the built-in AMD HD 6310 GPU.

Overclocking is possible on the E35M1-M PRO, but as Ian has mentioned before in his round up of three Fusion E-350 motherboards, it is always down to how lucky you get with your silicon because the APU is already installed on the motherboard when you buy it. A respectable overclock of 12% was obtained which brings the final clock speed of the CPU up to 1.792 GHz.

Visual Inspection

The ASUS E35M1-M Pro makes use of a low power APU from AMD which is located under the heatsink in the middle of the board. ASUS are maintaining their current color scheme for their non-ROG branded boards and have gone with blue and black combination. The Hudson M1 FCH is located next to the APU and it provides support for six SATA 6 Gbps ports, five of which are internal and one is an eSATA port.  Out of the five internal SATA 6 Gbps ports, four of them are angled and point away from the motherboard and one is not.

On the expansion side of things, we have a PCIe x16 slot which is electronically limited to x4, a PCIe x1 slot and two PCI slots. There are four USB 2.0 headers which will allow for up to eight extra USB 2.0 ports to be added into your system as well as a USB 3.0 header for an additional two USB 3.0 ports.

On the back of the board, we have a PS2 port (that can be used for either a keyboard or a mouse) and a total of four USB 2.0 ports. Two USB 3.0 ports are located under the gigabit LAN. Three different kinds of video connectivity are available and they consist of HDMI, DVI and D-SUB. There is also a S/PDIF optical output as well as a trio of audio jacks.

There are only two fan headers on this motherboard, one of which is for the CPU fan, which is located above the heatsink and just to the left of the DIMM slots. The second one is for a chassis fan and is located near the bottom left-hand side of the heatsink. An extra fan header would have been nice to see on a board this size, though is not absolutely necessary.

BIOS and 'Overclocking'


View All Comments

  • frilans - Saturday, December 3, 2011 - link

    Sandy Bridge can be passively cooled to safe temperatures under load. We have Intel Core i3-2105 (TDP 65W) processors in our office computers. I have built them with no moving parts in the H3.S case with passive cooling from HD-Plex (

  • duploxxx - Tuesday, October 25, 2011 - link

    much cheaper? the lowest priced mobo and the lowest price celeron will only get you in the same price range.

    not to mention the way higher TDP and I would love to see some GPU performance compares.
  • medi01 - Sunday, October 30, 2011 - link

    SB celeron + motherboard is NOT "much cheaper than this APU".
    Stop spreading FUD, Intel fanboi.
  • plonk420 - Wednesday, October 26, 2011 - link

    you can take the fan off just fine. ran for half a day like that.

    just to be nice, i put a PWM 120mm fan over it in the htpc case. can't hear it nor the PCP&C Silencer currently over my fridge running across the room.
  • davos555 - Tuesday, October 25, 2011 - link

    It is good for basic tasks - However I had one and it stuggles to play back HD video content - the hardware decoding doesn't work in linux media players because of lack of drivers. Apparantly it works best in Windows media players such as MPC but I havent test this! Reply
  • spaceyyeti - Tuesday, October 25, 2011 - link

    use xbmc. works great for me. Reply
  • C300fans - Tuesday, October 25, 2011 - link

    Yeah, SB will get much more ppd if you are crunching BOINC. Reply
  • futurepastnow - Tuesday, October 25, 2011 - link

    Great board for HTPC- unless you want to play modern 3D games on your TV. Then you'll need to step up to something with more CPU and graphics power.

    Also looks like it would be great for a home server, or a family member who only surfs the web and watches videos (that covers a lot of people).
  • mepenete - Wednesday, October 26, 2011 - link

    runnin AMD for graphics? Nothin but trouble if you're in Linux. Reply
  • gevorg - Tuesday, October 25, 2011 - link

    Couple of questions:

    1) Can this thing FLAWLESSLY play high bitrate HD 1080p from a hard drive or blu-ray disk?

    2) How good is the 23.976 playback?

Log in

Don't have an account? Sign up now