VESA Releases Embedded DisplayPort 1.4a Standard: Display Stream Compression Arrivesby Ryan Smith on February 11, 2015 8:00 AM EST
- Posted in
The last time we talked to the VESA was back in September, where the association announced their long-awaited DisplayPort 1.3 standard. Introducing a newer, higher signaling rate technology (HBR3) to drive higher resolution and higher refresh rate panels, DisplayPort 1.3 was targeted at driving newer display configurations such as 5K displays, multiple 4K displays via MST, and 8K displays with lower resolution 4:2:0 chroma subsampling.
Now 5 months later, the VESA and its partners are applying the same technology upgrades and more to the Embedded DisplayPort (eDP) standard, which today is being updated from 1.4 to 1.4a. The mobile counterpart to the standard DisplayPort standard, eDP defines a slightly different standard for laptops and other portable devices, with additional implementation details and features to better fit (and directly drive) mobile displays. Meanwhile despite the unassuming name change for this latest version, the introduction of eDP 1.4a is in practice a very substantial upgrade to the standard, introducing not only higher bandwidths but also new technologies that did not make it into DisplayPort 1.3.
From a bandwidth perspective, eDP 1.4a adds the HBR3 signaling mode from DP 1.3, giving eDP 1.4a the same 8.1Gbps/link data rate and the same ability to drive displays up to 5K (5120x2880) in resolution losslessly. While we’re unlikely to see 5K panels in laptops any time soon, this development is still important as the VESA and its members have other uses for the higher link speeds.
Joining HBR3 in this new version of eDP is support for the VESA and MIPI’s Display Stream Compression technology, which was first announced last year and has been in development for some time. With DSC, the VESA is tackling the display bandwidth problem from the other direction, focusing on reducing bandwidth needs through the use of a lossy, high quality “visually lossless” compression algorithm. Using a fixed rate codec with a series of different compression modes, DSC can reduce display bandwidth needs by as much as 3:1 (66%) while still retaining what should be a high quality image. DSC missed the initial cut for DisplayPort 1.3 last year, and as a result is finally making its debut in eDP 1.4a.
In the case of eDP 1.4a, it’s only with the combination of HBR3 and DSC that the standard delivers on its greatest benefits. By ratcheting up link speeds while simultaneously reducing bandwidth needs, the VESA is looking to reduce the number of links that displays need to implement to deliver a similar image, reducing the amount of power that must be spent on links and frame buffers. Though DSC and HBR3 add their own overhead to link operation, TCONs, and display controllers, being able to reduce the number of links should save more power than the new technologies cost due to the relatively high power costs of differential signaling, allowing device manufacturers to work on a sliding scale between bandwidth and power savings.
Meanwhile HBR3 + DSC also offers an alternative to using lower chroma subsampling resolutions to drive 8K displays, replacing the loss in chroma resolution with DSC. As with 5K panels, 8K panels are unlikely to appear in laptops, however this scenario would be applicable to devices with integrated displays such as All-In-One PCs and similar devices. Consequently while DSC didn’t make the cut for DisplayPort 1.3, we wouldn’t be surprised to see a DisplayPort 1.3a standard a bit farther down the line that adds DSC support, as eDP and DP often cross-pollinate on new technologies (HBR, Panel Self Refresh, etc).
Finally, eDP 1.4a also introduces one other feature not found in any previous DisplayPort standard: Multi-SST Operation (MSO). A kind of MST on steroids, MSO allows for the links in an eDP connection to be split up to drive separate panel segments/tiles, rather than teaming up all of the links and multiplexing the signal for all of the segments via MST. Though this doesn’t save in the number of links required, going this route allows for each tile to have a simpler TCON that doesn’t need to be able to handle the full bandwidth and complexity of a 4 link MST setup. Proposed by Samsung, MSO should drive down the cost of the TCONs required, along with the power/heat/space benefits that come from using simpler TCONs.
Wrapping things up, the VESA says that they expect the first eDP 1.4a devices to appear in 2016, in-line with the roughly 1 year window between standard adoption and device implementation that has followed previous DP standards. However I’m hoping we’ll be able test devices sooner than this, as we are very curious just how well DSC will work in practice and what the real image quality tradeoff will be for using it.
Source: VESA (Via SH SOTN)
Post Your CommentPlease log in or sign up to comment.
View All Comments
extide - Thursday, February 12, 2015 - linkActually, most video is ~30fps, not 60, so divide my numbers by half, so its "only" 40 times (not 79 times) more compressed.
extide - Thursday, February 12, 2015 - linkShit, my calculator failed. but lol, it makes my point even stronger .. 6mbit/sec is actually 0.75Mib/sec .. so Netflix SUPERHD is actually compressed at a ratio of 1:316 .. thats 105.33 TIMES more compressed than this.
474/.75 = 632
632 / 2 = 316 (60 fps to 30fps)
Netflix = 1:316
316 / 3 = 105.3333
AnnonymousCoward - Thursday, February 12, 2015 - linkGuess what, 24-bit color quantization and 60Hz samples already introduce "loss".
willis936 - Saturday, February 14, 2015 - linkAnd there's then loss in reconstruction of the analog signal too. You know where there should never be any loss? When transmitting a digital signal. That's one if the biggest reasons we moved to digital. Analog circuits can provide much higher bandwidth for video even today if you're willing to sacrifice quality for every cheap analog circuit it has to pass through.
dgingeri - Wednesday, February 11, 2015 - linkok, so now we have a standard for the internal communications for laptop displays, so what we need is a standard from factor for laptops so people can completely custom build a laptop with the capabilities they want. Why do we not already have this?
boeush - Wednesday, February 11, 2015 - linkIt irks me to no end that e.g. Google has been developing Project Ara (fully modular design) for smart phones for so long already, yet there is nothing like that in existence for laptops - which have been around much longer, and could benefit from it much more!
Joel Kleppinger - Wednesday, February 11, 2015 - linkThere's no need to let it irk you. Project Ara is likely a pipe dream just like modular/buildable laptops were. When size/complexity/price are all priorities, then modularity always suffers. It has a shot only because Google is involved, but at the end of the day, more people buy based on looks than features. With mobile contracts encouraging new phones, why upgrade some part?
A laptop has been modular (RAM, HD, CD drive, CPU, battery) but attempts to make the screen/graphics modular didn't have the desired effect (upgrade-ability) and every laptop was re-engineered so that the motherboard couldn't be modular (most important). There just isn't enough demand and when you get down to it, a new laptop is probably what you need anyway. (Better wifi, better memory support, newer CPU support, lower power chipset, faster SATA/PCIe support) and by the time you're thinking about that and factoring in that upgraded parts always cost more than they would because of low demand/manufacturing, you're looking at a new laptop.
In fact, due to the space/price/complexity battle, laptops have gotten significantly less modular. CPUs are usually soldered in, batteries aren't easily removable, RAM can be soldered in, cases harder to open.
In mobile, modularity has moved external. In fact, with most recent phones, it's arguable that even the case is modular as the cases these days are so thin, most people put big protectors on them because they aren't as durable.
darkfalz - Wednesday, February 11, 2015 - linkConsidering custom shape, size, cooling etc. of every laptop it's just not practical to ever make the motherboard modular. But the screen shouldn't be as much of an issue.
extide - Thursday, February 12, 2015 - linkCheck out Clevo/Sager
daku123 - Tuesday, February 17, 2015 - linkOn the very first chart, it should be GbPS (bits) not GBPS (bytes).