CPU Performance Benchmarks: DDR5-4800

To show the performance of DDR5 memory in different configurations, we've opted for a more selective and short-form selection of benchmarks from our test suite. This ranges from tests on application opening, rendering, web, and compression.

All of the tests were run with all of the memory at default (JEDEC) settings, which means DDR5-4800 CL40, regardless of the configuration, e.g, 2x16, 2x32, and 4x16 GB.

Web: Speedometer 2

Our web test for this analysis is Speedometer 2, which is a test over a series of JavaScript frameworks to do three simple things: built a list, enable each item in the list, and remove the list. All the frameworks implement the same visual cues, but obviously apply them from different coding angles.

Our test goes through the list of frameworks, and produces a final score indicative of ‘rpm’, one of the benchmarks internal metrics.

We repeat over the benchmark for a dozen loops, taking the average of the last five.

Speedometer 2.0 Web Test

In Speedometer, the 2Rx8/1PDC DDR5-4800 kit performed best of all out of the Samsung memory, with the 1Rx8/1DPC performing closely behind the 2 x 32 GB kit. The 1Rx8/2PDC (4 x 16 GB) kit from Samsung technically performed the slowest of all, but the performance difference was within a 3% margin of error from top to bottom.

The Micron 2 x 32 GB proved the best out of all the memory we tested, albeit without much difference from the rest of the 2 x 32 GB kits tested.

AIDA64: 6.60: link

AIDA64 Extreme has a hardware detection engine unrivaled in its class. It provides detailed information about installed software and offers diagnostic functions and support for overclocking. As it is monitoring sensors in real-time, it can gather accurate voltage, temperature, and fan speed readings, while its diagnostic functions help detect and prevent hardware issues. It also offers a couple of benchmarks for measuring either the performance of individual hardware components or the whole system. It is compatible with all 32-bit and 64-bit Windows editions, including Windows 11 and Windows Server 2022.

We are using AIDA64 in this instance to gather memory bandwidth data based on read speed, write speed, copy speed, and memory latency.

AIDA DRAM Read Speed

AIDA DRAM Write Speed

AIDA DRAM Copy Speed

AIDA DRAM Latency

Looking at raw memory benchmarks from AIDA64, all of the 2 x 32 GB kits perform competitively against each other. Meanwhile the Samsung 4 x 16 GB experienced drops in performance across the board, with both read bandwidth and write bandwidth being impacted. There's also a notable latency penalty to consider when using four DIMMs (2DPC) versus two DIMMs (1DPC).

The most interesting result here may very well be the Samsung 2 x 16 GB (1Rx8) kit. While it's fully competitive with read speeds, it loses just a little bit of ground on write speeds, and a little more ground on all-out copies. In what's admittedly a memory-focused test, it's a very early indicator that dual ranked DIMMs are the sweet spot in terms of performance, and that losing a rank does incur penalties. All of which is then further exacerbated by going to 2DPC.

WinRAR 5.90: link

Our WinRAR test from 2013 is updated to the latest version of WinRAR at the start of 2014. We compress a set of 2867 files across 320 folders totaling 1.52 GB in size – 95% of these files are small typical website files, and the rest (90% of the size) are small 30-second 720p videos.

WinRAR 5.90 Test, 3477 files, 1.96 GB

Looking at performance in WinRAR, this is where the higher density 2Rx8 memory showed its dominance. The kits with 16 Gb chips in 2Rx8 outperformed the 16 Gb 1Rx8, with the 2 x 16 GB Samsung kit notably outperforming the same memory running with four UDIMMs in a 2DPC configuration.

Rendering - Blender 2.79b: 3D Creation Suite

A high-profile rendering tool, Blender is open-source allowing for massive amounts of configurability, and is used by a number of high-profile animation studios worldwide. The organization recently released a Blender benchmark package, a couple of weeks after we had narrowed our Blender test for our new suite, however their test can take over an hour. For our results, we run one of the sub-tests in that suite through the command line - a standard ‘bmw27’ scene in CPU only mode, and measure the time to complete the render.

Blender 2.83 Custom Render Test

Focusing on rendering, the difference between the 2 x 32 and 2 x 16 GB kit was marginal. The 4 x 16 GB Samsung kit was technically the worst performer out of the bunch, but for all practical purposes, all 5 kits may as well be tied.

Rendering - Cinebench R23: link

Maxon's real-world and cross-platform Cinebench test suite has been a staple in benchmarking and rendering performance for many years. Its latest installment is the R23 version, which is based on its latest 23 code which uses updated compilers. It acts as a real-world system benchmark that incorporates common tasks and rendering workloads as opposed to less diverse benchmarks which only take measurements based on certain CPU functions. Cinebench R23 can also measure both single-threaded and multi-threaded performance.

CineBench R23 Single Thread

CineBench R23 Multi-Thread

Using CIneBench 23, there wasn't much difference between the 2 x 32 GB kits in the single-threaded test. In the multi-threaded test, the Samsung 2 x 16 GB kit actually performed better than the 2 x 32 GB kits, underscoring how all of the kits are essentially tied in this workload.

Rendering – POV-Ray 3.7.1: Ray Tracing - link

The Persistence of Vision Ray Tracer, or POV-Ray, is a freeware package for as the name suggests, ray tracing. It is a pure renderer, rather than modeling software, but the latest beta version contains a handy benchmark for stressing all processing threads on a platform. We have been using this test in motherboard reviews to test memory stability at various CPU speeds to good effect – if it passes the test, the IMC in the CPU is stable for a given CPU speed. As a CPU test, it runs for approximately 1-2 minutes on high-end platforms.

POV-Ray 3.7.1

In our POV-Ray testing, the Micron kit performed slightly better than the rest, with Samsung's 2 x 32 GB kit coming a close second. Both variations tested with the 16 GB sticks were slightly behind its higher density counterparts. There was around a 0.36% hit in performance when using four 16 GB memory sticks versus using two.

DDR5 Demystified: Testing Capacity, Ranks, and Do Manufacturers Matter? Gaming Performance Benchmarks: DDR5-4800
POST A COMMENT

68 Comments

View All Comments

  • ralritt - Thursday, April 7, 2022 - link

    All of the charts are labeled as DDR4-4800. Reply
  • Medikit - Thursday, April 7, 2022 - link

    I was going to mention this as well. Guess we are still getting used to saying/writing DDR5. Reply
  • Ryan Smith - Thursday, April 7, 2022 - link

    Indeed we are. Thanks for spotting that one! Reply
  • CynthiaPlatt - Sunday, June 12, 2022 - link

    I’ve made so far this year working online and I’m a full time student. I’m using an online business opportunity I heard about and I’ve made such great money. ccb. It’s really user friendly and I’m just so happy that I found out about it. Here’s what I do.
    .
    For more details visit:>>> http://brightfuture01.cf/
    Reply
  • flashmozzg - Thursday, April 7, 2022 - link

    Same with test setup. Reply
  • porina - Thursday, April 7, 2022 - link

    Interesting results. For DDR4 I found [2DPC 1R = 1DPC 2R] > 1DPC 1R, at same speed/timings. This was handy to use multiple small modules to get the higher performance, than the lottery of ensuring 2R modules since the trend over time is to lower rank at a given capacity. Life is going to be interesting when I decide to go DDR5! Reply
  • Gavin Bonshor - Thursday, April 7, 2022 - link

    I will change this as soon as I get WiFi on my laptop. Thanks for the spot Reply
  • lschiedel - Thursday, April 7, 2022 - link

    Now please follow up with a laptop test. What speed penalty is there on a 8gb soldered + 8gb sodimm with swapping the 8gb sodimm for a 32gb sodimm? And how does it compare with a model that comes standard with 16gb + 16gb? Reply
  • LordRahl72 - Thursday, April 7, 2022 - link

    +1 to this. I am thinking of adding a 32GB stick to my Zephyous m16 but wondering if there would be any performance hit or not. Reply
  • lschiedel - Thursday, April 7, 2022 - link

    i've already upgraded my m16.
    maybe we both should run the tests and compare.
    it would be nice if we could try a benchmark that can to test the first 16gb or all ram.
    Reply

Log in

Don't have an account? Sign up now