In and Around the SilverStone Temjin TJ04-E

I recently sold some hardware to a builder who actually bemoaned how common the understated black monolith enclosures were becoming. To an extent you can see where he's coming from, but the sleek brushed aluminum fascia and silver trim of the SilverStone Temjin TJ04-E is pretty tough to complain about.

Where vendors like Fractal Design are increasingly eschewing external drive bays, SilverStone opts for a quartet of 5.25" bays each covered with a black brushed aluminum bay shield that nicely complements the face of the tower. Below them are the power button, power and HDD activity LEDs, and reset button; the power button is probably the stiffest one I've ever seen and requires a little bit of force to power on the machine. It's not a bad thing, just something I noticed during testing. Since the power and reset buttons are going to see fairly infrequent use, SilverStone opted to move the connectivity to the top of the enclosure instead of keeping it chained up with the switches.

The top of the TJ04-E is home to a recessed pair of USB 3.0 ports (using a motherboard header as pretty much all modern cases now do) as well as the audio jacks, and then in the back is a removable cover for the two fan mounts that conceals a removable, easy-to-clean fan filter. When we get to the rear of the case, it's business as usual, although SilverStone is kind enough to include an eighth expansion slot as is becoming de rigeur.

Your first hint that things might be a little different with SilverStone's new enclosure is the lack of ventilation in the left side panel; meanwhile, the right side panel features a 120x240mm vent (which includes the same type of removable cover and fan filter as the top.)

When you do open up the TJ04-E, you'll see why the vents are where they are and why there's no front intake ventilation: the TJ04-E takes in air from the right side and the top instead of the front. Cool outside air essentially runs through and is deflected by hard drives in the drive cage, as well as being pulled in from above to move through the CPU heatsink assembly and out the back of the case.

SilverStone uses a toolless design for securing the bay shields, but pretty much everything else inside the TJ04-E requires tools. The drive cage is secured by four screws, and drives are screwed in instead of placed on rails. There's also a smaller secondary cage at the bottom of the enclosure for six 2.5" drives, secured with four small screws. In the midst of all this SilverStone includes a 120mm fan mount, and while they don't include a fan installed, it seems clear to me that they intend for you to use it (at least if you're running multiple hard drives). Finally, there's a healthy amount of space behind the motherboard tray (particularly next to the power supply) for cables to be routed.

There are just enough tweaks in the TJ04-E's design to make one curious about how everything will play out in practice. Even the top fan mounts are actually shifted to the left side of the case to avoid having a 240mm radiator come in contact with memory, chipset, or VRM heatsinks. Yet like virtually all of SilverStone's designs, this isn't expected to be an easy build, so get your power screwdriver ready.

Introducing the SilverStone Temjin TJ04-E Assembling the SilverStone Temjin TJ04-E
Comments Locked


View All Comments

  • Rolphus - Friday, February 10, 2012 - link

    I've just put my new gaming machine together using a TJ-08E (chosen largely because of your review), and I absolutely agree that they are tricky cases to put together - and this is coming from someone with an Antec P180.

    I had to substantially re-cable my machine 3 times during the build as I worked out the best places for everything to go.

    That said, I'm really, really pleased with my machine - the thermals are excellent, the case is reasonably light, and it's wonderfully compact and quiet.

    I think it's a real pity that they're only using 120mm fans in this more conventional case. The 180mm fan in the TJ-08 is key to its success.
  • burntham77 - Monday, February 13, 2012 - link

    That is great to hear. I am planning to move my parts into a TJ-08E soon. I have been looking for a small case that doesn't sound like a vacuum cleaner, and that one seems to fit the bill. If I may, what CPU and GPU do you use?
  • Rolphus - Tuesday, February 14, 2012 - link

    Sure! for completeness: my setup is:

    Intel Core i5-2500K (at 4GHz, stock voltages with vDroop correction: I've not tried pushing it harder)
    EVGA Z68 Micro SLI
    MSI GeForce GTX580 Twin Frozr II - actually not recommended: the TJ08's manual suggests only getting GPUs that blow air "out" of the case (as in the reference design) rather than those that blow air in both directions.
    Pioneer BDR-206DBK Blu-ray Writer - this is just short enough to fit in the case with...
    Silverstone Tech. Strider Plus 850W PSU
    Antec Kúhler H2O 920 CPU cooler
    1TB Seagate Barracuda 7200.12
    64GB Crucial M4 (as a Smart Response Technology cache)

    The machine is very quiet even under heavy load (FurMark + Prime95 x 3), with the only real noise being the GPU fans.

    I had to work a little to get the Kuhler in place, and think carefully about the order I installed things, but everything fitted nicely with clean airflow.
  • Risforrocket - Friday, February 10, 2012 - link

    Thank you, Mr. Sklavos, for a nice review. I have been looking at this case.

    I have two remarks. I would like to see case reviews done with the case configured in a way a reasonably enthusiastic owner would configure the case. In this case, configured with the optional fans installed including the bottom fan and the SSD cage removed. I think that is reasonable especially as this case is not a low end case but rather a lower cost enthusiast case. Give the case it's best chance, within reason.

    My second remark is that you uncovered the weakness in this case, the cooling airflow. I think Silverstone should fix that but I suppose that won't happen. I don't think the use of screws is a negative at all whereas hard mounting the disk drives might be, well, *is* because that takes us back to a time when no one cared about noise or vibration. Lol, I know, I was there.

    That you need to remove the SSD cage in an attempt to fix the cooling airflow leads me to ask myself how would I fix this problem? I think the HDD cage and cooling fans are cool. Remove the SSD cage altogether and provide 2.5" mount options elsewhere, make the bottom cooling fan the main intake fan, make the top fans exhaust rather than intake. That's three intake, three exhaust and a reasonable airflow pattern.

    I actually think case design should begin with an airflow design. Well, I'm tired. Thanks again for a nice review.
  • MilwaukeeMike - Friday, February 10, 2012 - link

    You're right about the case congifuration, but the case has to be setup in the same way that previous reviews were done or the comparison numbers won't be as meaningful. As soon as he makes some modification for a review the comments fill up with bias accusations, suggestions for improvement, and other differences of opinion.
  • cjs150 - Friday, February 10, 2012 - link

    I love Silverstone cases and this is why:

    "it seems like nobody ever told their engineers something couldn't or shouldn't be done"

    Most case designers are lazy and nothing has really moved design forward for years (moving PSU from top to bottom is not a big jump forward!). Silverstone and Lian Li are the exceptions. Of course some of the designs do not work as well as originally thought but they are at least trying.

    This is a design that does not work as the airflow is not good enough.

    But please Silverstone keep trying
  • Sabresiberian - Saturday, February 11, 2012 - link

    I don't know if you've paid attention to the Antec lineup, but they come up with an occasional new idea as well.

    I draw your attention specifically to the Skeleton and the Lanboy. These cases may not be what you find esthetically pleasing, but they are far from lazy, old designs.

  • cjs150 - Monday, February 13, 2012 - link

    I had forgotten about the Skeleton - definitely designed by someone who had never been told what should be done!

    Not convinced by the lanboy - assume you mean the Airboy (or whatever the mesh heavy case is called), other than the mesh, it looked a standard case design but have to admit I have not re-read the reviews for a while as it was not suitable for me.

    Antec do very nice small HTPC designs though - again highly original
  • r3loaded - Friday, February 10, 2012 - link

    Silverstone are great because they innovate a lot in computer cases, an area that you'd otherwise think doesn't need or have much innovation. They certainly aren't afraid to try wacky things like the FT-03, just to see if it'll work. I own an FT-03 and while it's certainly not for everyone, you just have to admire the design and the quality of the finish.

    On the difficulty of assembling it, it's not difficult if you just follow the manual closely. This is certainly one area where it's best to drop the "real men don't need manuals" machismo and do exactly what it says. You'll get it right first time, and once it comes together, it comes together beautifully.
  • Rick83 - Friday, February 10, 2012 - link

    Having discovered how the power cable is supposed to be installed in an FT-03, and performing the procedure, I disagree.

    Had to take a knife to the plug, to force it through the aperture it was supposed to go through, and through which it didn't go when it was delivered. Only discovered that that routing was possible at all when I swapped fans.

    While I really like the case, and it fits my needs perfectly, there are some very rough edges that occasionally rear their ugly head.
    another example would be the installation of the 2.5" drive with the customary angled SATA cables. Almost impossible, as the cable routing hole in the mainboard is just a tiny bit too low for an angled plug stuck on the mainboard.
    Also, 12 screws to install a second 2.5" drive did seem somewhat excessive to me.

    And why oh why didn't they have the titanium gray version at launch :D

Log in

Don't have an account? Sign up now