ASUS Goes USB 3.1: Motherboards, PCIe Cards and Enclosures Testedby Ian Cutress on February 24, 2015 7:45 AM EST
As the motherboard reviewer at AnandTech, I speak to my contacts at the motherboard manufacturers on a regular basis. All the recent talk has had a heavy sprinkling about thoughts, opinions and implementations of USB 3.1. To add to our recent testing, ASUS is today announcing the launch of their USB 3.1 PCIe card along with a variety of motherboard bundles either featuring onboard USB 3.1 or a bundled USB 3.1 card. We stuck the card in the Rampage V Extreme to run the numbers with an ASUS dual mSATA USB 3.1 enclosure.
The ASUS Plan Of Attack
As we expressed in our previous piece, USB 3.1 adoption will take an excruciating long time, especially as USB 3.0 is only now reaching price party with USB 2.0. But as with USB 3.0 we will first start to see USB 3.1 adopted on PCIe cards and extra controllers first on desktops followed by high end laptops before it becomes part of the chipset standard. Even then, with a ubiquity of ports available, it takes time for the devices to appear in the market with sufficient quantity to become cost effective for all but the early adopters.
Nevertheless, motherboard manufacturers want to tackle this head on. As far as we can tell there are a handful of IC manufactures that can provide controllers to be placed in products, but ASMedia are more ready than others to actually sell the components. ASUS' close relationship with ASMedia allows them to approach the market in two different ways - either by an onboard controller or via a bundled PCIe card.
At this point in time, all the implementations from ASUS will be via the Type-A interface. A couple of high end motherboards will be offered with USB 3.1 PCIe cards, while those lower down the stack will be modified for the onboard controller for about a dozen in total. There will be a USB Type-C card released at a later date, available only as a separate purchase.
One tack that ASUS is implemented differently is the color of the USB 3.1 Type-A ports. Standard procedure for USB 2.0 is a black port, with USB 3.0 as blue. This is not a hard and fast rule, as we see red ports on some motherboards for gaming or green ports on the Razer Blade, but as if yet there is no clear definition for USB 3.1. In this instance, ASUS is going with a teal blue to represent USB 3.1, and offers enough contrast from USB 3.0.
The card itself uses the ASMedia ASM1142 controller in a PCIe 2.0 x2 form factor. This should provide the 10 Gbps data rate for the USB 3.1 standard. The Type-A versions will support 900 mA charging at 5V, whereas Type-C will do 3A at 5V, suitable for 15W. In order to get the 100W charging and implement the enhanced power standard, the power delivery delivery has to be built into the power module around the USB 3.1 controller. With PCIe cards this makes more sense, although it would require the card to have an extra power connector (either SATA, molex or PCIe). When the USB 3.1 port is on the rear panel of a motherboard, it makes it more difficult to apply the approach power planes, especially on cheaper motherboards, as well as drawing power directly from the 24-pin ATX and directing the appropriate power around the processor. Thus if we ever see 100W charging on motherboards, PCIe cards might be the way forward.
As part of the testing bundle, ASUS supplied a near-final version of a USB 3.1 storage device. This small form factor uses two 256 GB Samsung 840 EVO mSATA drives in RAID-0 for maximum throughput.
In order to keep the size of the device down, it uses a Type-C connector for data along with a micro-USB for power. This means that the device requires two USB ports in all, which is understandable for a dual mSATA device that requires power but perhaps somewhat limiting for devices with only one USB port. It is unknown if ASUS will sell this enclosure separately at this point.
Both the card and the enclosure are still in development, and we had a difficult time to get it to work. For example, with the Rampage V Extreme and the USB 3.1 card, the enclosure had to be plugged in at power up, with power and data both connected to the card. Without this, the system would not recognize the device or it would enter a speed mode indicative of PCIe 2.0 x1 data transfers eventually ending up in an IO error. Also, our setup did not want to work in USB 2.0 mode at all. But when we installed the right drivers, and booted the system with the cables set up as required, we got great performance. There was a little coil whine during system writes, but as mentioned this device is still in development, and hopefully all these issues can be ironed out.
Unfortunately all the hardware for our previous USB 3.1 testing had to be sent back which means we cannot do a direct comparison due to different enclosures, but it is still interesting to see where the numbers land. ASUS is also touting an updated USB 3.0 Boost as well, dubbed USB 3.1 Boost, to help with transfers. The current state of play with USB transfer speeds is a miasma from XP drivers, base Intel drivers for Windows 7 and then UASP implementations in Windows 8. The basic mode in Windows 7 means that Bulk Only Transfer (BOT) is par for the course:
UASP, or USB Attached SCSI Protocol, allows transfers to occur by multitasking the transfers without the need for constant iterations up and down the stack for each read or write command.
Windows 8 offers a good version of UASP, however ASUS’ customized driver for Intel and ASMedia based ports goes one better through optimization. Normally such processes sacrifice latency for peak speeds, although we are rarely latency limited with a USB drive. Windows 7 also gets a similar driver, which represents a bigger boost from the base driver there.
|Processor||Intel Core i7-5960X ES
8 Cores, 16 Threads, 3.0 GHz (3.5 GHz Turbo)
|Motherboards||ASUS Rampage V Extreme|
|Cooling||Cooler Master Nepton 140XL|
|Power Supply||OCZ 1250W Gold ZX Series
Corsair AX1200i Platinum PSU
|Memory||Corsair DDR4-2133 C15 4x8 GB 1.2V
G.Skill Ripjaws 4 DDR4-2133 C15 4x8 GB 1.2V
|Memory Settings||JEDEC @ 2133|
|Video Cards||MSI GTX 770 Lightning 2GB (1150/1202 Boost)|
|Video Drivers||NVIDIA Drivers 332.21|
|Hard Drive||Crucial MX200 1TB CT1000MX200SSD1|
|Optical Drive||LG GH22NS50|
|Case||Open Test Bed|
|Operating System||Windows 7 64-bit SP1|
|USB 2/3 Testing||ASUS USB 3.1 Enclosure|
For the setup, we tested the USB 3.1 enclosure in the USB 3.1 Type-A card installed into a red slot on the Rampage V Extreme (a CPU PEG slot), the Intel PCH based USB 3.0 ports and the ASMedia controller based USB 3.0 ports. In each of these scenarios, USB 3.1 Boost is applied for a second set of data. Due to our initial issues (our first USB 3.1 card was DOA), ASUS sent a spare set of hardware and another enclosure – we can confirm that the second enclosure exhibited the same speeds, confirming a level of consistency.
Due to some issues getting IOmeter to recognize the drives without a partition, the IOmeter results for peak throughput seem low compared to the AS-SSD and CrystalDiskMark testing. But on the other hand, we easily show a ~50% boost in random write speeds, as moving from 84 MBps to 125 MBps (Intel 3.0 -> ASMedia 3.1) marks a significant shift. Our copy test shows a similar gain, even more so when USB 3.1 Boost is factored in.
As of the official announcement in the US today, a number of SKUs will be available for users to purchase (as long as you don’t mind waiting for USB 3.1 devices to come along). These motherboards will be split into two sections:
Motherboards with Bundled USB 3.1 Cards (Type-A for now):
Rampage V Extreme/U3.1 ($519, ETA 2/27)
X99-Deluxe/U3.1 ($409, ETA 3/3)
Motherboards with USB 3.1 Type-A Built-In:
X99-Pro/USB 3.1 ($339, ETA 2/27)
X99-A/USB 3.1 ($279, ETA 3/10)
X99-E WS/USB 3.1
Z97-Deluxe/USB 3.1 ($299, ETA 3/3)
Z97-PRO(Wi-Fi ac)/USB 3.1 ($229, ETA 3/3)
Z97-A/USB 3.1 ($159, ETA 3/10)
Sabertooth Z97 Mark 1/USB 3.1 ($259, ETA 3/3)
B85M-G PLUS/USB 3.1
The USB 3.1 card, with the appropriate driver update, will be $39 and have an ETA of 3/10. Both cards should be compatible in the following motherboards:
Technically ASUS would prefer that these cards are used solely for use in ASUS motherboards and are being validated as such. A full validation list should be available on the product page for the USB 3.1 cards when it becomes available. Performance on any other motherboard is not guaranteed, but we wouldn’t say it was impossible. The official specifications are:
Most manufacturers will go all in with Type-A to begin with, as Type-C is still new to the market. Type-A can still be used with current devices and drives, whereas Type-C cables are still new. Given that the controller requires two PCIe 2.0 lanes, it makes interesting reading as to how freely USB 3.1 might be implemented on Intel’s next desktop platform. USB 3.1 will also be a differentiator in the laptop and notebook space, and I suspect several companies will market the functionality and charge for the privilege, despite the lack of enclosures right now. The fact that ASUS is going to sell its USB 3.1 card for $39 means that implementation costs should be low for notebook manufacturers.
As part of this release, ASUS also sent us a list of USB 3.1 devices that they plan of validating with the USB 3.1 ports. Most of the company names come from Asia and might represent a few of the ODMs that the more consumer-oriented brands use, but the list totals 34 items (Hubs, enclosures, cables) with availability for a few of them from March. I suspect that Computex time (June) will be ramping up the USB 3.1 ecosystem for the early adopters for sure.
Post Your CommentPlease log in or sign up to comment.
View All Comments
Laststop311 - Tuesday, February 24, 2015 - linkthis is just meh until its natively in intel's chipset.
ToTTenTranz - Tuesday, February 24, 2015 - linkUSB 3.0 was pretty relevant way before it became part of Intel's chipsets. Almost all SandyBridge motherboards had USB 3.0 support through an external controller.
DanNeely - Tuesday, February 24, 2015 - link"Given that the controller requires two PCIe 2.0 lanes, it makes interesting reading as to how freely USB 3.1 might be implemented on Intel’s next desktop platform."
Intel's next platform will offer PCIe 3.0 from the southbridge (vs 2.0 on today's mobos). Hopefully ASMedia will have a 1 lane PCIe 3.0 version of the current controller available when Skylake launches. A version that uses 2 3.0 lanes so it can run both ports at 3.1 speeds concurrently would be nice too, although given the popularity of onboard 3.0 hubs to cheaply add ports on current boards makes me doubt it'd see much adoption. Skylake's chipset will offer 28 high speed IO ports (USB3, Sata6gb, PCIe) up from 18 on 8 or 9 series chipsets; so even the only controller available at launch is the current one needing 2 PCIe lanes shouldn't be a catastrophic limiting factor.
SirKnobsworth - Tuesday, February 24, 2015 - link1 PCIe 3.0 lane actually doesn't have quite enough bandwidth to saturate a USB 3.1 connection - PCIe 3.0 allows 8 Gb/s on each lane but USB 3.1 is 10 Gb/s. That's not accounting for overhead though.
defter - Tuesday, February 24, 2015 - link"it uses a Type-C connector for data along with a micro-USB for power"
What!? The whole point of type-C is to provide power along data.
Besides, it's not like two mSATA SSDs use lot of power.
WithoutWeakness - Tuesday, February 24, 2015 - linkI was really disappointed to read that too. A few months back we were all sold on a USB 3.1 type C connector that offered 10Gbps data throughput as well as up to 100W of power. We've been told for months that we could finally charge our laptops and connect to an external display or port replicator dock through one cable. And now we're being sold an actual product that can't power 2 mSATA SSD's (a whopping 10W) without the need for a second USB connector for power?
My only thought is that the PCIe card isn't engineered to deliver enough power on its own. PCIe slots are rated to deliver 75W on their own and they could always add a Molex, SATA, or 6-pin PEG power plug to the card if they need more power than the slot alone can provide. Since there aren't any heatsinks on any components on the card my guess is that nothing there needs more than a few watts of power and there's no reason they can't push enough power through the USB cable other than the cost to add the components is too high to justify for this cheap add-in card. If that's the case then I can't imagine high-powered USB 3.1 devices catching on because the biggest strength of USB is its low cost to implement compared to something like Thunderbolt. Manufacturers will just stick with low power over USB 3.1 for high data transfer rates and require a wall wart for anything over 5W like they always have.
DanNeely - Tuesday, February 24, 2015 - linkThe power distribution spec that offered upto 100W is optional, has always been optional, and has always been described as such in articles at reputable sites like this one.
Also, only 8/16x cards can do 75W power. Smaller ones are only able to draw 25W. In both cases 10W is 3.3v, the remainder 12V.
Lastly, going above 60W would require a collection of VRMs similar to what you have around the CPU because the 100W level is at 20V and would need to be created on the card instead of just pumped from the PSU.
WithoutWeakness - Tuesday, February 24, 2015 - linkI understand all of that. I recognize that they would need additional VRM circuitry on the PCIe card and would need to negotiate power requirements with the connected device. That's a given. What I'm irritated by is that they didn't just add a Molex, SATA, or 6-pin connector to provide the additional 12V power. I'm disappointed by ASUS's lack of foresight and the fact that they didn't include some sort of secondary power connector for this PCIe card to provide additional power to devices that may require it (including their own 10W dual-mSATA demo box).
I don't expect every laptop, desktop, phone, tablet, or anything else that might be a host device to be able to provide 20V@5A. That would be unreasonable. But I don't think it's unreasonable to expect a $40 desktop PCIe card with a single USB port to be able to supply 10W over USB. The issue is that if someone buys this card then any device they try to plug in will either require less than 10W power draw or will need a second USB connector or wall wart for power.
The greatest appeal of USB has always been its low cost. Either the cost of implementation is too high or ASUS cheaped out on the power delivery to increase margins and gimped this card as a result. I'm hoping that it's the latter and we will see more reasonably priced options from other companies that fully support the new power delivery spec. If $40 is the expected price for a single-port USB 3.1 card that can't push 10W of power then USB 3.1 is dead on arrival.
teddoman - Thursday, March 12, 2015 - link"If $40 is the expected price for a single-port USB 3.1 card that can't push 10W of power then USB 3.1 is dead on arrival."
Where exactly are you getting this? The review says: "The Type-A versions will support 900 mA charging at 5V, whereas Type-C will do 3A at 5V, suitable for 15W." The spec sheet says the same thing. If you buy the PCIe card with a true Type C connector, then you're getting 3A at 5V which is the intended spec for USB 3.1.
eanazag - Tuesday, February 24, 2015 - linkWas that micro C port on the enclosure? It looked small. Hence it may require a second for power.